Oki MC363 Advanced Manual page 48

1
Press the (SCAN) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Press the or button to select a scan function and press the
If you selected [USB Memory], go to step 5.
Sending Scanned Data as an E-mail Attachment
Saving Scanned Data to USB Memory
Saving Scanned Data in a Shared Folder
4
Press the or button to select [Scan Setting] and press the
5
Press the or button to select [Image settings] and press the
6
Press the or button to select [Background Removal] and press the
button.
7
Press the or button to select the value you want to set and press the
(OK) button.
8
Change other settings if necessary, and then press the
(COLOR) button.
Removing Show-Through (Show-Through Removal)
Show-Through Removal removes show-through of text from the reverse side. You can select
the removal level from OFF, Low, Middle, or High.
• This function is enabled only when [Background Removal] is set to [Auto].
• This function is enabled only when [Document Type] is set to [Text] or [Text&Photo].
1
Press the (SCAN) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Press the or button to select a scan function and press the
If you selected [USB Memory], go to step 5.
Sending Scanned Data as an E-mail Attachment
Saving Scanned Data to USB Memory
Saving Scanned Data in a Shared Folder
4
Press the
5
button. Press the
6
Press the
button.
7
Press the
(OK) button.
button.
button.
• [Middle] is set by default.
• If light color becomes too faint with Middle (default value), set to [Low] (show-through may not be removed
completely).
• If show-through is not completely removed with Middle (default value), set to [High] (light color may not be
represented).
• For documents printed only one side or when reproducing light color, set to [OFF]. (For documents printed on
two side, show-through remains.)
8
Change other settings if necessary, and then press the
(MONO) or
(COLOR) button.
Adjusting the Contrast
Differences between bright and dark sections on a document are adjusted to make images
and texts easier to view and read.
1
Press the
2
Set a document in the ADF or on the document glass.
3
Press the
If you selected [USB Memory], go to step 5.
Sending Scanned Data as an E-mail Attachment
Saving Scanned Data to USB Memory
button.
Saving Scanned Data in a Shared Folder
4
Press the
5
Press the
- 48 -
or button to select [Scan Setting] and press the
or button to select [Image settings] and press the
or button to select [Show-Through Removal] and press the
or button to select the value you want to set and press the
(SCAN) button on the operator panel.
or button to select a scan function and press the
or button to select [Scan Setting] and press the
or button to select [Image settings] and press the
3. Scan
button.
button.
(MONO) or
button.
button.
button.