Problems on the Machine or Paper
This section describes problems with the machine and paper.
• Problems on the Machine
• Problems on Document and Paper
• If a Power Failure Occurs
• Before Relinquishing Your Device
Problems on the Machine
If you cannot solve a problem with the following solutions, contact your dealer.
• Nothing is displayed on the display screen after turning the machine on.
Cause
The power cord is unplugged.
The power is out.
• The machine does not operate.
Cause
The power cord is not firmly plugged
in.
The machine is turned off.
• The power switch LED lamp quickly flashes at approximately 0.3-second
intervals.
Cause
A malfunction may occur in the
machine.
• The output tray cannot be closed.
Cause
The belt unit and image drums are
not properly installed.
- 248 -
Solution
Turn the machine off, and then plug
-
in the power cord firmly.
Check whether the power is supplied
-
to the outlet.
Solution
Plug in the power cord firmly.
-
Turn the machine on.
Turning the Machine On (User's
Manual)
Solution
Unplug the power cord immediately,
-
and then contact your dealer.
Solution
Remove the four image drums, and
Replacing the Belt Unit
then remove and correctly reinstall
the belt unit.
7. Troubleshooting
Reference
Reference
Reference
Reference