You can change other settings for fax transmissions.
Setting Scanning for Transmission
Enabling the Scan to Fax Server Function
To enable the Scan to Fax Server function, follow the procedure below in Admin Setup.
If the Scan to Fax Server function is enabled, the fax function is disabled.
1
Press the
(SETTING) button on the operator panel.
2
Press the
button once to select [Admin Setup] and press the
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the
button to select [FaxServer Function] and press the
5
Check that [Environmental Settings] is selected, and then press the
6
Check that [FaxServer Function] is selected, and then press the
7
Press the
or
button to select [ON] and press the
8
Check that [Yes] is selected on the confirmation screen, and press the
button.
The machine automatically restarts.
- 189 -
5. Fax
button.
(OK) button.
button.
button.
button.
(OK) button.
(OK)