User Install - Oki MC363 Advanced Manual

• Reset Settings* 2
Item Factory default setting
2
Reset Settings* -
• Job Log Setup
Item Factory default setting
Clear Job Log* 3 -
• Print Statistics
Item Factory default setting
Maintenance Counter Disable
Reset Main Counter -
Reset Supplies Counter -
*1 A message is displayed to confirm the equipment restarts automatically when changes have been made. Select
[Yes] to continue. Select [No] to cancel.
*2 A message is displayed to confirm the equipment restarts automatically when executed. Select [Yes] to continue.
Select [No] to cancel.
*3 A message is displayed to confirm that all job logs are deleted when executed. Select [Yes] to continue. Select
[No] to cancel.
Description
Deletes job macros, fax transmission /
reception data, and the history information,
and returns the settings to the default.
Description
Clears the saved job logs.
Description
Sets whether to print the consumable
counter's report.
Resets the main counter.
Reset the consumable counter.
This item is displayed when [Maintenance
Counter] is set to [Enable].
- 285 -

User Install

Item
Time Zone
Daylight Saving
Time Setup Auto Setup SNTP Server
(Primary)
SNTP Server
(Secondary)
Manual Setup
Power Setup Auto Power Off
Power Supply Return
Office Document Mode
(Except MC363)
High Humid Mode
Quiet Mode
(Except MC363)
Drum Near Life Timing
Fuser Near Life Timing
Belt Near Life Timing
MF (Tone) / DP (Pulse)
9. Operating Management/ Specifications
Factory Description
default
setting
+00:00 Sets the time GMT zone.
Available range: -12:00 to +13:00 (15 minutes
/ increment)
ON Sets whether to enable the Daylight Saving
mode.
Sets the SNTP server to use for setting the
current date and time. You can enter up to
64 characters.
2001/01/01 0:00 Sets the current date and time manually.
Auto Config Sets the behavior of Automatic Power Off.
State Continue Sets a power supply method at the time of
recovery from the power failure.
Select [Manual] if you do not want to make the
machine automatically to turn on after the
recovery.
Mode1 This mode allows to always enable the toner
save function.
To forcibly enter the machine in toner save
mode, select Mode2.
OFF Sets whether to enable the humidity mode.
Selecting [Enable] reduces curl generated
while printing.
(MC363: On/Off only)
OFF Sets whether to reduce the printing noise.
Setting to [ON] affects printing speed.
1000 Sets the timing for the near life warning for the
drum cartridges.
1000 Sets the timing for the near life warning for the
fuser unit.
1000 Sets the timing for the near life warning for the
belt unit.
Tone Select a dial type.
Tone
Pulse