4. To install the lock
4.1 Necessary tools for the installation
The tools shown in Figure 12 are needed for assembly of the lock:
Pozidriv 2 screwdriver
Cross-head screwdriver
Wrench 8 mm (5/16)''
Hexagon pipe
If cylinder is applicable: Unbrako 2 mm (5/64)''; only used to fasten the
cylinder fastening screw
4.2 Door handle selection
It is possible to choose between a variety of standard door handles.
Gothic
Straight
Figure 13: Standard VingCard Essence (v2) door handles
ASSA ABLOY Hospitality
Figure 12: Tools needed for installing the lock;
the Unbrako is only needed if cylinder is applicable
ANSI
Wing
16
66 1000 023-4