Assa Abloy VingCard Essence User Manual page 27

ASSA ABLOY Hospitality
Figure 27
Figure 28
Figure 29
6. Thread the spindle locking clip (21) onto
the spindle handle female Signature (20;
on the inside of the door) by squeezing
hard on the spindle locking clip. Make
sure that the clip clicks onto the hole
in the spindle handle.
7. At delivery, the handle retainers*
Signature (3 and 18) are not mounted
into the handle on inside rose Signature
(2) and handle on outside rose Signature
(17), and they must be prepared
according to the
handle on inside rose Signature is a
left handle (i.e. pointing to the left),
the white retainer should be mounted
on the inside handle. If the handle on
inside rose Signature is a right handle,
the black retainer should be mounted
on the inside handle.
Important: For both left handles
and right handles, make sure that
the handle retainer*Signature is in
the "click" position within the groove
on the shank of the handle.
27
door handing. If the
66 1000 023-4