Assa Abloy VingCard Essence User Manual page 52

3. Before inserting the spindle handle female Signature (20) and the spindle
handle male Signature (19) into the lock case, check that the spindle threads
are lubricated with grease.
4. Screw the spindle handle female Signature onto the spindle handle male Signature
and then reverse it (3/4 turn).
5. Insert the spindle handles into the lock case from the outside of the door so that
the hole that goes through the spindle handle is visible on the inside (room side)
of the door.
the door.
ASSA ABLOY Hospitality
Figure D5
Note: The spindle handle marked 'EXT' must be on the outside of
52
Figure D6
66 1000 023-4