Table of Contents
Advertisement
ASSA ABLOY Hospitality
Figure D20
Figure D21
Figure D22
Figure D23
Figure D24
24.Connect the LCU cable to the LCU and
adjust the bracket in order to enter the
LCU against the sprocket.
Note: Arrange the cables to prevent
pinching them.
25.Fasten the bracket with the
wrench (8 mm).
Note: Tighten gently.
26.When the LCU has entered the bracket,
use the hexagon pipe to turn the
sprocket in order to pull the LCU
in place.
Note: Tighten gently.
27.When the LCU is pulled all the way
into the door leaf, fasten the screw
in the centre of the sprocket by using
a Pozidriv #2 screwdriver.
Note: Tighten gently.
28.Insert 3 AA batteries.
29.Fix the face plate of the case, upload
the firmware and attach the service cover
of the LCU. The service cover shall be
inserted 90 degrees to the left and then
be turned 90 degrees clockwise in order
to fasten
.
58
66 1000 023-4
Hide quick links:
Advertisement
Table of Contents
