Euro Adb - Assa Abloy VingCard Essence User Manual

Appendix C: To install ADB
ADB lock case, EURO
When installing or upgrade to EURO lock case, the external striker plate must be
installed as shown in Figure C5; dimensions in mm.
Figure C5: EURO ADB lock case
The notes below refer to Figure C5.
Note 1: Latch - same function as standard ASSA ABLOY Hospitality EURO lock.
Note 2: Auxiliary latch/deadbolt trigger - when the door is closed and the auxiliary
latch hits the striker plate/frame, the automatic deadbolt will be thrown and the latch
will be blocked. Always install a striker plate before installing the lock case in the
door. If the door with lock case is closed without a striker plate, the auxiliary latch
will be jammed in the frame cut-out. The dimension from the front of the lock case
to the striker plate must not exceed 4mm to obtain automatic deadbolt function.
Note 3: Automatic deadbolt - the deadbolt throws automatically when the door
is closed.
Note 4: Privacy hub - with the thumbturn, the privacy hub can be rotated 45°.
When the escutcheon thumbturn Signature (pos 4 in the exploded views of
section 4.3) is pointing downwards, the privacy function is off. When the escutcheon
thumbturn Signature is rotated 45°, the privacy function is on. The deadbolt cannot
be retracted with the thumbturn.
Figure C6: Thumb turn position at
'privacy off' and 'privacy on'
ASSA ABLOY Hospitality 66 1000 023-4
48