Table 15: Legacy Qos Settings - Grandstream Networks GWN7000 User Manual

Select from the drop-down list the acc policy to apply, policies can be managed
ACC Policy from the Policy Manager tab.
This field appears only when Type is set to "acc".
Use Active This Option must be enabled when using ACC (Adaptive Congestion Control) QoS
Congestion type under the selected wan interface.
Controller This field appears only when Type is set to "acc".
Enter the IPv4 address of the target where the router will send ICM echo messages
Use Custom ping
to track the health of the link (RTT measurements...etc).
target
This field appears only when Type is set to "acc".
Value that indicates the congestion on the ISP link, this is automatically calculated
Target ping time limit
on the back end of the router, but users can override it.
(ms)
This field appears only when Type is set to "acc".
Name Define a name for the traffic class.
Set the priority of the traffic class, the lower the value, the highest the priority. Valid
Priority
range is between 1 and 64.
Select the WAN interface from which the traffic will be classified, make sure to
Interface
enable the desired interface it from in order to appear.
Set Upstream bandwidth value. The value should end with "Mbit", "Kbit".
Note that the sum of created classes should have upstream bandwidth speeds
Upstream lower than the Upstream bandwidth value configured on QoS Basic.
Examples: 100Mbit
Class Select a class from created traffic classes using drop-down menu.
Name Define a Name for the traffic filter rule.
Choose the Differentiated Services Code Point (DSCP) value from drop-down list.
DSCP
Default is 0.
IP Source Address Specify the Source IP address from which the traffic filter rule will be applied.
IP Destination
Specify the Destination IP address to which the traffic filter rule will be applied.
Address
TCP Source Port Specify the TCP Source port from which the traffic filter rule will be applied.
TCP Destination Port Specify the TCP Source port to which the traffic filter rule will be applied.

Table 15: Legacy QoS Settings

Traffic Class
100Kbit
Traffic Filter
GWN7000 User Manual
Version 1.0.6.28
P a g e |
41