Configuring Gwn7000 Ipsec Tunnel - Grandstream Networks GWN7000 User Manual

Configuring GWN7000 IPSec Tunnel

In order to build an IPSec secure tunnel between two devices located on different places on the Internet,
we can use the sample scenario below:
Branch office router needs to connect to Headquarters office via an IPSec tunnel, on each side we have a
GWN7000 router. Users can configure the two devices as following:
The branch office router runs a LAN subnet 192.168.1.0/24 and the HQ router runs a LAN subnet
192.168.3.0, the public IP of the branch office router is 1.1.1.1 and the IP of the HQ router is 2.2.2.2.
Configuration of Branch office router:
Go under VPN → IPSec then click on add and fill in the following information under phase 1 tab:
P a g e |
101
GWN7000 User Manual
Version 1.0.6.28