Once this is done, the two routers will build the tunnel and the necessary routing information in order to
route traffic through the tunnel back and from the branch office to HQ network.
For reference, the table below gives the descriptions of the parameters used for phase 2 settings:
Field
Local Subnet
Local Source IP
Figure 64: HQ Router IPSec Phase 2 Configuration
Table 34: IPSec Phase 2 Parameters
Description
Configure the local subnet that will be included on the connection.
Configures the source IP to be used when transmitting a packet to
the other end of the connection.
GWN7000 User Manual
Version 1.0.6.28
P a g e
|
106