Routing; Static Routes; Table 18: Ipv4 Static Routes - Grandstream Networks GWN7000 User Manual

Static Routes

GWN7000 supports setting manually static IPv4 and IPv6 routes as well as displaying routing table entries.
Static routes configuration page can be accessed from GWN7000 WebGUI→Router→Static Routes:
Three tabs are available:
Routes to view routing table entries.
-
IPv4 to create, edit or delete static IPv4 static routes.
-
IPv6 to create, edit or delete static IPv6 static routes.
-
Following actions are available in both IPv4 and IPv6 tabs:
•
To add a new static route, click on
•
To edit a static route, click on
•
To delete a static route, click on
Refer to the following tables when editing or creating IPv4/IPv6 static routes:
Name Enter the Name of the static route to be configured.
Enabled Select whether to enable or disable this static route.
Interface Choose the LAN network or WAN port, which will be using this static route.
Enter the Network/Host IP address on which to route the traffic to.
Target Network/Host
Example: 192.168.5.0
Enter the Network/Host Netmask.
Netmask
Example: 255.255.255.0
Enter the NextHop IP address.
NextHop
Example: 192.168.5.1.
Metric Set the metric value. The valid range is 0-255. Default value is 0.

ROUTING

Table 18: IPv4 Static Routes

GWN7000 User Manual
Version 1.0.6.28
P a g e |
46