Qos; Figure 11: Qos - Grandstream Networks GWN7000 User Manual

QoS

The GWN7000 offers the possibility to enable and configure QoS on both WAN and LAN interfaces, this
will help to manage in more depth the network traffic to define priority and classify different services and
protocols in a scheduled manner.
To activate QoS, check "Enable QoS". Three tabs are available for configuration:
•
Basic: Download and upload bandwidth speeds settings on each WAN interface.
•
Upstream QoS: Upstream QoS allows creating Traffic Classes to prioritize traffic for specific
resources on the network by controlling transmission/upload rate. Note that different classes can be
created and assigned as Traffic filters by respecting following conditions:
✓ The total of Upstream bandwidth values of each created class should not exceed the
upstream bandwidth value configured in Basic.
✓ The remaining bandwidth will be lent to the next priority level of class.
✓ All filter options are summed together.
•
Policer: While Upstream QoS is dealing with traffic transmission, Policer is controlling the incoming
traffic. Thus, allowing to create rules to specific targets to set priority and received traffic rate, giving
the GWN7000 the ability to drop the exceeding traffic when reaching the configured maximum rate.
Refer to the following tables for each tab option:

Figure 11: QoS

GWN7000 User Manual
P a g e | 28