Table 49: Debug-Capture; Figure 87: Capture Files - Grandstream Networks GWN7000 User Manual

•
Click on
will appear, click on
on a local folder, or click on
The below table will show different fields used on capture page
File Name Enter the name of the capture file that will be generated.
Choose an Interface (WAN port1 or 2, or a network group) from where to begin the
Interface
capture.
Device Choose a device plugged to USB port to save the capture once started.
File Size Set a File size that the capture will not exceed (Optional field).
Rotate Count Set a value for rotating captures (Optional Field).
Choose if you want to get all traffic or only outgoing or incoming to the choses
Direction
interface.
Source Port Set the Source Port to filter capture traffic coming from the defined source port.
Destination Port Set the Destination Port to filter capture traffic coming from the defined port.
Source IP Set the Source IP to filter capture traffic coming from the defined source IP.
Set the Destination IP to filter capture traffic coming from the defined destination
Destination IP
IP.
Choose ALL or a specific protocol to capture (IP, ARP, RARP, TCP, UDP, ICMP,
Protocol
IPv6)
to show the captured files on a chosen device, and the capture files details
to delete all files, click on
to delete it.

Figure 87: Capture Files

Table 49: Debug-Capture

GWN7000 User Manual
Version 1.0.6.28
next to a capture file to download it
P a g e |
140