Table 55: Snmp Advanced Page - Grandstream Networks GWN7000 User Manual

Read-Write Gives the permission for the set community to access and read/write to devices in
Community for IPv4 management information base via IPv4 Protocol.
Read-Only Gives the permission for the set community to access and read only to devices in
Community for IPv6 management information base via IPv6 Protocol.
Read-Write Gives the permission for the set community to access and read/write to devices in
Community for IPv6 management information base via IPv6 Protocol.
Choose the Trap Type from drop-down menu, 4 options are available: None,
Trap Type
SNMPv1, SNMPv2c and SNMPv2cInforms.
Enter the Monitoring Host's IP/Domain Name (Network Management System
Monitoring Host
"NMS")
Monitoring Host Port Enter the Monitoring Host's Port (Network Management System "NMS")
Trap Community Enter the Trap Community string to authenticate the client against the server.
Click on
SNMP Service
Listening on
Click on
SNMPv3 Users

Table 55: SNMP Advanced Page

to add an SNMP Service Listening on:
•
Set the Transport Type: UDPv4, UDPv6, TCPv4 or TCPv6.
•
Choose the IP Address from drop-down menu list.
•
Set the Port number on which the GWN7000 will listen on.
to add an SNMPv3 User:
•
Set the Username for authentication.
•
Choose the Authentication type, 2 options are available: SHA and MD5.
•
Set the Authentication Password from Authentication Passphrase.
•
Enter the Password again to confirm from Authentication Passphrase
Confirmation.
•
Choose the Privacy Protocol, 3 options are available: None, DES and
AES.
•
Set the Privacy Passphrase.
•
Enter the Privacy Passphrase in Privacy Passphrase Confirmation
field.
GWN7000 User Manual
Version 1.0.6.28
P a g e |
151