Global Settings - Grandstream Networks GWN7000 User Manual

Preferred DNS
Alternate DNS

GLOBAL SETTINGS

This sections describes global settings tab for WAN Ports, that will be used for enabling/disabling Failover
and Load Balancing on WAN ports.
The following table shows the configuration parameters for WAN Ports global settings
Failover Enabled
Load Balance
Enabled
and IPv4 Gateway, or set IPv6 address, Prefix and Prefix Length if Enable
IPv6 is checked.
x
PPPoE
When selected the user will have to set the PPPoE account and password,
PPPoE Keep alive interval and Inter-Key Timeout in seconds.
Enter the preferred DNS server address. If Preferred DNS is set, GWN7000 will
use it in priority.
Enter the Alternate DNS server address. If Preferred DNS is set, GWN7000 will
use it in when the Preferred DNS fails.
Table 5: GWN7000 WEB GUI->Router->Port->Global Settings
If checked failover will be enabled for both WAN ports, forbid login after x
attempts ? Default is disabled.
If checked Load Balance will be used on both ports to optimize the ressource
utilization. Please note that for this feature to work, WAN ports should be
connected to different networks. Default is disabled.
GWN7000 Enterprise Router & Access Point Manager
User Manual
P a g e | 23