Gwn7000 Pptp Server Configuration; Figure 60: Pptp Client - Grandstream Networks GWN7000 User Manual

Destination
Remote Subnet
IP Masquerading
Use DNS from Server
Number of Attempts to
Reconnect
Use Built-in IPv6 management
MPPE
2- Click
3- Click

GWN7000 PPTP Server Configuration

To configure PPTP server on the GWN7000, go to "VPN→PPTP→Server" and set the following:
1- Click on
Choose to which destination group or WAN to allow traffic from the
VPN, this will generate automatically a forwarding rule under the
menu Firewall → Traffic Rules → Forward.
Configures the remote subnet for the VPN.
The format should be "IP/Mask" where IP could be either IPv4 or
IPv6 and mask is a number between 1 and 32.
For example: 192.168.5.0/24
This feature is a form of network address translation (NAT) which
allows internal computers with no known address outside their
network, to communicate to the outside. It allows one machine to act
on behalf of other machines.
Enable this option to retrieve DNS from the VPN server.
Configures the number of attempts to reconnect the PPTP client, if
this number is exceeded, the client will be disconnected from the
PPTP Server.
Enable the IPv6 management for the VPN.
Enable / disable the MPPE for data encryption. By default, it's
disabled.
after completing all the fields.
on top of the web UI to apply changes.

Figure 60: PPTP Client

and the following window will pop up.
GWN7000 User Manual
Version 1.0.6.28
P a g e |
97