Field
Enable
VPN Name
PPTP Server Address
Client Start Address
Client End Address
Figure 61: PPTP Server Configuration
Table 32: PPTP Server Configuration Parameters
Description
Click on the checkbox to enable the PPTP VPN Server.
Enter a name for the PPTP Server.
Configure the PPTP server local address (ex: 192.168.1.1).
Configure the remote client IP start address.
Note: this address should be in the same subnet as the end address
and PPTP server address.
Configure the remote client IP end address.
Note: this address should be in the same subnet as the start address
and PPTP server address.
GWN7000 User Manual
Version 1.0.6.28
P a g e
|
98