Firmware Version 1.0.4.23; Firmware Version 1.0.4.20; Firmware Version 1.0.2.75; Firmware Version 1.0.2.71 - Grandstream Networks GWN7000 User Manual

Firmware Version 1.0.4.23

•
Added support for enable/disable MPPE in both PPTP server and client. [MPPE]

Firmware Version 1.0.4.20

•
Added support for Additional Routed Subnets. [Additional IPv4 Addresses][Destination IP]
•
Added support for Timed Client Disconnect and Enhanced Client Blocking. [Clients Access]
•
Added support for Client Bridge (GWN76xx Access Point is required for this feature.). [Client Bridge]
•
Added support for OpenApp ID for Deep Packet Inspection. [DPI]
•
Added support for Syslog Server. [Logserver]
•
Added support for PPTP Server. [PPTP CONFIGURATION]
•
Added support for Smart Queue QoS. [QoS]
•
Added support for Configurable web UI access port.[Web WAN Access][Web HTTP Access][Web
HTTPS Port]
•
Added support for E-mail notifications. [Email/Notification]

Firmware Version 1.0.2.75

•
Added support for Captive Portal [CAPTIVE PORTAL]
•
Added support for Bandwidth Rules [BANDWIDTH RULES]
•
Added support for Select Band per SSID [SSID Band]
•
Added support for selectively enable 802.11b/g/n [Mode]
•
Added option to enable/disable support for 802.11b devices [Allow Legacy Device(802.11b)]
•
Added support for custom wireless power [Custom Wireless Power(dBm)]
•
Added support for AP location using blinking LED [Access Point Location]
•
Added support for limit client count per SSID. [SSIDs]
•
Added support for better roaming decision [SSIDs]
•
Added support for LEDs schedule [LED]
•
Added support for Wi-Fi schedule [SSIDs]
•
Added option to enable/disable DHCP option 66 & 43 override [Allow DHCP options 66 and 43
override]

Firmware Version 1.0.2.71

•
This is the initial version.
GWN7000 User Manual
Version 1.0.6.28
P a g e |
15