Table 21: Device Configuration; Figure 26: Discovered Devices; Figure 27: Gwn7610 Online - Grandstream Networks GWN7000 User Manual

3. Click on Pair
4. The paired GWN76xx will appear Online, Click on
5. Click on next to paired access point to check device configuration for its status, users
connected to it and configuration, or select multiple GWN76xx APs from the same model, and
click on
6. Click on to configure client bridge on the selected access point. For more details about the
client bridge feature, please refer to Client Bridge.
Refer to below table for Device Configuration tabs.
Status
Clients
Configuration

Figure 26: Discovered Devices

under Actions, to pair the discovered Access Point with the GWN7000.

Figure 27: GWN7610 online

to apply same configuration on selected units.

Table 21: Device Configuration

Shows the device's status information such as Firmware version, IP
Address, Link Speed, Uptime, and Users count via different Radio
channels.
Shows the Clients connected to the GWN76xx access point.
•
Device Name: Set GWN76xx's name to identify it along with its
MAC address.
•
Fixed IP: Used to set a static IP for the GWN76xx, if checked, the
following needs to be configured:
GWN7000 User Manual
Version 1.0.6.28
to unpair it.
P a g e |
55