Access; Syslog; Table 47: Maintenance - Access; Table 48: Maintenance - Syslog - Grandstream Networks GWN7000 User Manual

Firmware Server
Config Server
Check Update on Boot
Automatic Upgrade Check
Interval(m)
Reboot
Download Configuration
Upgrade Now
Factory Reset

Access

Current Administrator
Password
New Administrator
Password
Confirm New
Administrator Password
User Password
User Password
Confirmation

Syslog

Syslog Server
Syslog Level
Configure the IP address or URL for the firmware upgrade server.
Configure the IP address or URL for the configuration file server.
Choose whether to enable or disable automatic upgrade and provisioning
after reboot. Default is disabled.
Specify the time period to check for firmware upgrade (in minutes).
Click on Reboot button to reboot the device
Click on Download to download the device's configuration file.
Click on Upgrade, to launch firmware/config file provisioning.
Please make sure to Save and Apply changes before clicking on Upgrade.
Click on Reset to restore the GWN7000 as well as all online GWN76xx units
to factory default settings

Table 47: Maintenance - Access

Enter the current administrator password
Change the current password. This field is case sensitive with a maximum
length of 32 characters.
Enter the new administrator password one more time to confirm.
Configure the password for user-level Web GUI access. This field is case
sensitive with a maximum length of 32 characters.
Enter the new User password again to confirm.

Table 48: Maintenance - Syslog

Enter the IP address or URL of Syslog server. Please reboot the GWN7000
to take effect.
Select the level of Syslog, 5 levels are available: None, Emergency, Alert,
Critical, Error, Warning, Notice, Information and Debug.
Please reboot the GWN7000 to take effect.
GWN7000 User Manual
Version 1.0.6.28
P a g e |
137