Figure 21: Members List; Figure 22: Policies List - Grandstream Networks GWN7000 User Manual

We consider that the administrator has already configured the three wan ports and their IP and running
which can be under the "Router → Status" page.
As explained above, the GWN7000 router will automatically generate members for the three wan ports
under "Routing → Policy Routing → Members"

Figure 21: Members list

Users can set different weights for WAN1 and WAN2 in order to set how the router will distribute the data
traffic over the two WAN ports.
Next the we will see that the router will have already created automatically the load balancing policy and
WAN3 only auto policy under Policy tab as shown on the following figure.

Figure 22: Policies List

The next step would be to assign the routing policy in order to send normal data traffic in a load-balanced
way over wan1 and wan2 and send the traffic for VoIP over wan3.
For the network group LAN data traffic, users need to navigate to Router → LAN and edit the created
network group then assign load balance routing policy and select wan1 and wan2 port as destinations.
P a g e |
51
GWN7000 User Manual
Version 1.0.6.28