Field
Enabled
VPN Name
Remote Address
Interface
IKE Version
IKE Lifetime
Key Exchange mode
Pre-Shared key
Figure 62: Branch Office IPSec Phase 1 Configuration
Table 33: IPSec Phase 1 Parameters
Description
Enable or Disable the IPSec tunnel.
VPN Connection Name.
Enter the IP address of the remote side of the tunnel.
Select from which interface the router will try to build the VPN
connection.
Allows the use to choose between using IKE version 1 or 2.
Default value: IKEv1
Specifies in seconds the lifetime of the keying channel.
Default: 3600 seconds.
Select which mode to use for key exchange during the stage of
channel establishment: Main mode or Aggressive mode.
Enter the PSK password for authentication.
GWN7000 User Manual
Version 1.0.6.28
P a g e
|
103