Table of Contents
Advertisement
Router Configuration
Connect to GWN70xx's Web GUI from a computer connected to a LAN port or GWN70xx's Wi-Fi SSID and go to the Web GUI
→ Network Settings → WAN page for WAN configuration.
WAN Settings
The WAN port can be connected to a DSL modem or a router. WAN port support also setting up static IPv4/IPv6 addresses
and configure PPPoE.
GWN7062 has a port (LAN 4/WAN), by default it's configured as a LAN port. The user can configure this port as a WAN port
(WAN 2) and it can be used in a load balancing between WAN 1 and WAN 2.
IPv4 Settings
Figure 22: System Info
Advertisement
Table of Contents
