DMZ
GWN7000 support DMZ, where it is possible to specify a LAN client to be put on the DMZ.
•
To add an IP into the DMZ, click on
•
To edit a DMZ entry, click on
•
To delete a DMZ entry, click on
Refer to below table for DMZ fields:
Name
Enabled
Source Group
Destination Group
Destination IP
UPnP
GWN7000 supports UPnP that enables programs running on a host to configure automatically port
forwarding.
UPnP allows a program to make the GWN7000 to open necessary ports, without any intervention from the
user, without making any check.
UPnP settings can be accessed from GWN7000 WebGUI→Firewall→Basic→UPnP Settings.
Refer to below Table for UPnP settings.
.
.
.
Figure 67: DMZ
Table 36: DMZ
Specify a name for the DMZ entry.
Check to enable this DMZ entry.
Select the WAN interface
Select the LAN group.
Set the destination IP address.
GWN7000 User Manual
Version 1.0.6.28
P a g e
|
110