Table 20: Create Policy Members; Figure 19: Create A New Member - Grandstream Networks GWN7000 User Manual

Name Enter the Name for the member.
Interface Select the interface to which the member points.
Metric Enter the value of the metric related to the member (default is 1).
Enter the weight that will be attributed to the member, in case load balancing is
Weight used, this will indicate how much traffic will be routed via this member through the
specified interface. Default value is 1.
Note: By default, GWN7000 router will generate automatically members for each created/configured WAN
interface and VPN client tunnel interface.
After this, users need to create policies which lists the members that will be used by each policy from the
menu Routing → Policy Routing → Policy.
Click on button in order to create a new routing policy then choose the members that would
be listed (included) on the policy.

Figure 19: Create a New Member

Table 20: Create Policy Members

GWN7000 User Manual
Version 1.0.6.28
P a g e |
49