Using Voucher With Gwn Captive Portal; Table 43: Voucher Parameters - Grandstream Networks GWN7000 User Manual

Also, users can use the drop-down list filter
created at specific date-time.
The following table summarizes description for voucher configuration parameters:
Field
Create Number One Time
Device Quota
Duration
Expiration
Downstream
Upstream
Notes

Using Voucher with GWN captive portal

In order to successfully use the voucher feature, users will need to create a captive portal in order to request
voucher authentication codes from users before allowing them access to internet. More details about
captive portal will be covered on next section but for voucher configuration please follow below steps.
1. Go under "Captive Portal → Captive portal" menu.
2. Press
3. Set the following parameters as shown on the screenshot for basic setup then save and apply.

Table 43: Voucher Parameters

Description
Specify how many vouchers to generate which will have same
profile/settings (duration, bandwidth and number of users).
Specify how many users can use the voucher.
Specify the duration after which the voucher will expire, and clients
will be disconnected from internet.
Note: in case or multiple users, the duration will start counting after
first user starts using the voucher.
Set the validity period of credentials, limited to 1-365 integer. The unit
is day.
Set the downstream bandwidth speed limit (in Kbps or Mbps).
Set the upstream bandwidth speed limit (in Kbps or Mbps).
Notes for the admin when checking the list of vouchers.
in order to add new captive portal policy.
GWN7000 User Manual
Version 1.0.6.28
to filter the vouchers that where
P a g e |
127