Yamaha DME4io-ES Service Manual page 65

Personal computer that
supports Ethernet
• When inspecting the 96 kHz IN connector, set up I/O Patch of the NAI48-ES as shown in the fi gure below through
the AVS-ES Monitor on the PC.
• Connection in case of OUT connector test
Connect the EtherSound [OUT] connector of the DME Satellite to be inspected and the [IN] connector of the NAI48-
ES as a jig with a LAN straight cable. Also, connect the EtherSound [IN] connector and [Ethernet] connector of the
DME Satellite to PC through a hub. Input 96 kHz to the Word Clock connector of the NAI48-ES from an external
device in case of 96 kHz test or input 48 kHz in case of 48 kHz test.
Personal computer that
supports Ethernet
HUB
Word Clock 48 kHz/96 kHz
(from 01V96, etc.)
WC IN
NAI48-ES as a jig
HUB
Word Clock 48 kHz/96 kHz
(from 01V96, etc.)
WC IN
NAI48-ES as a jig
DME4io-ES/DME8i-ES/DME8o-ES
IN DME Satellite to be inspected
OUT
IN
IN
OUT
DME Satellite to be inspected
IN
65