Yamaha DME4io-ES Service Manual page 128

DME4io-ES/DME8i-ES/DME8o-ES
BACKUP
When you click the [Backup] command on the [Tools] menu, the "Backup" dialog box is displayed.
Data in the DME is gathered in the computer and saved as a fi le. Backup fi les are created for each DME. You can also send
the information saved in a fi le to a DME. Backup can be performed only when in offl ine status.
Backup operations can be performed only by users for whom the [Edit] security checkbox has been checked.
[Target DME]
Displays DME, IP addresses, and DME types for each zone. Check the DME from which you want to obtain data. You can
place checks next to multiple DMEs.
[Folder] Box
Specifi es the folder that will be the destination for saving and reading operations. Clicking the [Browse] button opens the
folder select dialog box, where you can specify a folder.
The backup fi le name will be the DME's IP address. If the folder is specifi ed when sending DME data, the fi le sent to the
DME will be the fi le in the folder whose fi le name that matches the DME's IP address.
[Load] Button
Sends the backed up fi le to the specifi ed DME.
[Save] Button
Obtains data from the specifi ed DME, and saves it as a backup fi le.
[Close] Button
Closes the dialog box.
128