Yamaha DME4io-ES Service Manual page 51

1-2. Personal Computer Setting
q Download the DME Satellite test program data package from the YSISS homepage.
URL>> http://plaza.yamaha.co.jp/ysiss/exindex.nsf
The following is DME Satellite test program data package composition.
w Copying DME Satellite test program data package
Double click on "copy_satellite.bat" and all the fi les of DME Satellite test program data package will be automatically
copied to C:¥TOOL_SATELLITE.
∗ The fi les are overwritten even when the "C:¥TOOLS_SATELLITE" folder is already made and the fi les are in it.
e Installing TeraTerm
Double click on "setup.exe" of C: ¥TOOLS_SATELLITE¥Driver¥TeraTerm.
Then the TeraTerm Pro Setup screen is displayed.
After this, follow the direction displayed on screen to complete the installation. Don't change the installation
destination "C:¥PROGRAM FILES¥TTERMPRO" to any other area.
r Installing USB-MIDI Driver
After checking that the power of the DME is turned off, connect the USB terminal of PC (or USB hub) and USB
terminal of the DME with a USB cable. Then, turn on the power of the DME and "Wizard for detecting a new
hardware" will be automatically displayed.
After this, follow the direction displayed on screen to complete the installation.
∗ The driver is in the following folder.
C: ¥TOOLS_SATELLITE¥Driver¥Usb-midi¥Version2.1.5.1¥Driver
t Installing DME-N NETWORK driver
Double click on "setup.exe" of C: ¥TOOLS_SATELLITE¥Driver¥DME-N Network Driver¥DME-N Network Driver
V1.0.0. Then the YAMAHA DME-N Network Driver-InstallShield Wizard is activated. After this, follow the direction
displayed on screen to complete the installation.
∗ If the driver is already installed, it is not necessary to reinstall the driver.
Component
Driver ES Tools
ES Monitor
CobraTools
DME24-Setting
DmeDesigner
DME-N Network Driver
TeraTerm
Usb-midi
Prog
Tools Cobramac
Macbar
Sync
TeraTerm-Setting
Update
DME4io-ES/DME8i-ES/DME8o-ES
DMEDesigner_
Firmware
DME-N Network Driver V1.0.0
Version2.1.5.1
Component
Boot
Prog
51