Yamaha DME4io-ES Service Manual page 56

DME4io-ES/DME8i-ES/DME8o-ES
2-3. Exit from Determination and Execution Screen of Each Test
Exiting the checking method and execution screen of each test (returning to Testing Item Selection List Screen) is
illustrated below by specifi c patterns.
(1) Visual Check, Semiautomatic Check (except SWITCH Test) and Measurement Check
*** 15. LED
OK:[ENTER], NG:[0]
[Visual Check, Semiautomatic Check (except SWITCH
Test) and Measurement Check Screen]
Exit is made using a key displayed on PC.
Pressing the [0] key forces the test to terminate, but NG will be displayed on the right side of the corresponding testing
item. (This indicates that the test is not completed yet.)
If the [ENTER] key is pressed in the middle of the test, it will be invalidated.
(2) SWITCH Test
*** 17. DIPSW
Set Position
[_ ~~~~~ ]
123456
NG:[ENTER]
[DIP SWITCH Test screen]
In the SWITCH test, press the [ENTER] key to exit.
If test for all switches are completed, the display returns to the Testing Item Selection List Screen automatically.
(3) Automatic Check Test
In case of one test pattern
*** 01. SRAM
SRAM AddressBus
SRAM DataBus
EXIT:[ENTER]
[Automatic Check Test screen]
After completion of a test under the automatic test items, test data may be displayed in addition to the OK/NG
indication as a test result. If the [ENTER] key is pressed on this screen, it will return to the Testing Item Selection List
Screen.
56
***
***
***
OK!
OK!