5.4.2
Coaxial cable
5.4.2.1
Preparing coaxial sensor cable
Note
IMPORTANT
Make sure the cable gland
cable BEFORE beginning to strip cable.
Prepare unterminated coaxial cable ends as follows:
1. Strip unterminated outer jacket
2. Trim exposed inner shield
conductor
3. Fold back exposed inner shield
conductor
FSS200 clamp-on sensors
Installation Manual, 08/2017, A5E36255466-AC
①
and NPT Adapter
③
④
and dielectric to shown length (mm/in) to expose the center
⑤
.
④
⑤
to shown lengths (mm/in).
②
have been threaded onto the sensor
to shown lengths (mm/in).
③
over outer jacket
and trim dielectric
Connecting
5.4 Sensor wiring
⑥
and center
49