Wall Mount Fst020 - Siemens SITRANS FSS200 Installation Manual

Connecting
5.5 Connecting sensors to transmitter
5. Tighten all cable glands to obtain optimum sealing.
6. Refer to transmitter FST030 Operating Instructions to program transmitter.
5.5.5

Wall mount FST020

Connecting to FST020 transmitter
Note
The following example is shown in the Reflect mount sensor configuration.
Connect sensor cables to the wall mounted transmitter as follows:
1. Refer to Transmitter FST020 (Page 65) sensor cable preparation and connections.
2. To connect the sensor cables to the sensors, fill sensor connector end with Super Lube
prior to connecting.
3. Apply Super Lube to the internal threads at the large end of the thread connector.
4. Observing the upstream and downstream orientation
④
70
to the transmitter port (1A) and make connection snug.
③
, connect upstream sensor cable
FSS200 clamp-on sensors
Installation Manual, 08/2017, A5E36255466-AC