Note
CE declaration
The CE declaration certificate is available on the SensorFlash SD card delivered with the
device.
2.3
Use in hazardous locations
Qualified personnel for hazardous area applications
Persons who install, connect, commission, operate, and service the device in a hazardous
area must have the following specific qualifications:
● They are authorized, trained or instructed in operating and maintaining devices and
systems according to the safety regulations for electrical circuits, high pressures,
aggressive, and hazardous media.
● They are authorized, trained, or instructed in carrying out work on electrical circuits for
hazardous systems.
● They are trained or instructed in maintenance and use of appropriate safety equipment
according to the pertinent safety regulations.
2.3.1
Unsuitable device for the hazardous area
Use in hazardous areas
Risk of explosion in hazardous areas. May cause death or serious injury.
• Only use equipment that is approved for use in the intended hazardous area and
FSS200 clamp-on sensors
Installation Manual, 08/2017, A5E36255466-AC
WARNING
labeled accordingly.
Safety notes
2.3 Use in hazardous locations
13