Certificates And Support; Certificates; Sensor Markings; Technical Support - Siemens SITRANS FSS200 Installation Manual

Certificates and support

A.1

Certificates

Certificates are posted on the Industry online support portal
processinstrumentation/certificates) and can also be found on the documentation disk
shipped with the device.
A.2

Sensor markings

Sensor markings and explanations
●
Category 1 Sensors located in Zone 0 potentially explosive atmosphere with intrinsically
safe circuits of category Ex ia for use in potentially explosive atmosphere containing
gases.
● Intrinsically safe Class I, II, III, Division 1, Groups A, B, C, D, E, F and G
A.3

Technical support

Technical Support
If this documentation does not provide complete answers to any technical questions you may
have, contact Technical Support at:
● Support request (http://www.siemens.com/automation/support-request)
● More information about our Technical Support is available at
Technical Support (http://www.siemens.com/automation/csi/service)
Internet Service & Support
In addition to our documentation, Siemens provides a comprehensive support solution at:
● Online Support (http://www.siemens.com/automation/service&support)
Personal contact
If you have additional questions about the device, please contact your Siemens personal
contact at:
● Partner (http://www.automation.siemens.com/partner)
FSS200 clamp-on sensors
Installation Manual, 08/2017, A5E36255466-AC
II 1 G Ex ia IIC T6...T2
II 1D Ex ia IIIC T70...110 °C
(http://www.siemens.com/
A
87