Invertek Drives Optidrive ODP-2 User Manual page 76

Fault No.
Code

49
 50

51

52

53
11
Invertek Drives Ltd. Offa's Dyke Business Park, Welshpool, Powys SY21 8JF United Kingdom
OLED Message
Description
Output Phase Loss One of the motor output phases is not connected to the drive.
Modbus Comms fault A valid Modbus telegram has not been received within the watchdog time limit set in P5-06.
Check the network master / PLC is still operating.
Check the connection cables.
Increase the value of P5-05 to a suitable level.
CAN Open comms trip A valid CAN open telegram has not been received within the watchdog time limit set in P5-06.
Check the network master / PLC is still operating.
Check the connection cables.
Increase the value of P5-06 to a suitable level.
Communications Option Internal communication to the inserted Communication Option Module has been lost.
Module Fault
Check the module is correctly inserted.
IO card comms trip Internal communication to the inserted Option Module has been lost.
Check the module is correctly inserted.
Ñ82-P2MAN-IN_V3.00(Ó
Tel: +44 (0)1938 556868 Fax: +44 (0)1938 556869
www.invertekdrives.com
Corrective Action
82-P2MAN-IN_V3.00