The Boot Sequence Menu - Siemens SIMATIC Rack PC 840 Manual

Configuring the SIMATIC Rack PC 840
5.6

The Boot Sequence Menu

This menu allows you to prioritize the boot devices.
Figure 5-16
1) IntelR Boot Agent is only displayed if, beforehand, the LAN Remote Boot
function has been set to "Enabled" in the hardware options menu.
This menu lists the boot devices in groups. The group with the highest priority is at
the top. The procedure for changing the sequence is as follows:
Use the ↑↓. keys to select a group and the + or – keys to move the group to its
new position in the sequence.
Note
During booting the boot drive can be selected with the ESC key.
5-22
PhoenixBIOS Setup Utility
Main Advanced Security
+Removable Devices
+Hard Drive
CD–ROM Drive
Intel. Boot Agent 1)
Help Select Item
F1
ESC Exit Select Menu
The "Boot Sequence" Menu
Power Boot Sequence
Item Specific Help
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or –
<Ctrl+Enter> expands
all
<+> and <–> moves
the device up or down.
+ / – Change Values F9
Enter Select
Sub-Menu F10
SIMATIC Rack PC 840 Manual
Version Exit
Setup Defaults
Save and Exit
A5E00104826-03