Download  Print this page

Advertisement

3.7

Boot Menu

In the "Boot" menu, you specify the boot characteristics of the device and determine
bootable device components (boot media) and boot order. The following figure shows an
example for the "Boot" menu.
Parameter
Boot Type
Quick Boot
Quiet Boot
POST Errors
Network Stack
BIOS Description
Operating Manual, 05/2016, A5E33664825-AB
Meaning
Dual Boot Type
Legacy Boot Type
UEFI Boot Type
Enable (Enabled) or disable (Disabled) Quick Boot.
If enabled, the device starts faster because BIOS skips various hardware
function tests.
During the self-test, the boot logo is displayed (Enabled) or startup
information is displayed in text mode (Disabled).
Refer to section "Advanced-Menü", "Boot Configuration" submenu.
1
Specifies whether the UEFI Network Stack is available (Enabled)
or not available (Disabled) for network access using UEFI .
When Disabled , for example, no UEFI installation is possible via PXE.
Both legacy and EFI boot media are listed
and approved as boot media.
Only legacy boot media are listed and
approved as boot media.
Only EFI boot media are listed and approved
as boot media.
BIOS Setup (SCU)
3.7 Boot Menu
35

Advertisement

   Also See for Siemens SIMATIC IPC627D

Comments to this Manuals

Symbols: 0
Latest comments: