Table of Contents
Advertisement
17.6.2
Starting BIOS Setup
Starting BIOS Setup
Start the setup program as follows:
Reset the device (warm or cold restart).
In the figures shown, the default settings differ based on the device versions. With the
default setting of your device, the display shown below appears following power-on, for
example:
Phoenix BIOS 4.0 Release 6.0
Copyright 1985 - 2002 Phoenix Technologies Ltd.
All Rights Reserved
SIMATIC Box PC 840 V2 Profibus/MPI
CPU = Intel ® Pentium 4 CPU X.X GHz
639 K System RAM Passed
xxxxxx M Extended RAM Passed (xx depending on memory expansion)
512 K Cache SRAM Passed
ATAPI CD/DVD-ROM : xx CD-ROM
On completion of the POST, the BIOS gives you the opportunity of starting the SETUP
program. The following message appears on the screen:
Press < F2 > to enter SETUP or <ESC> to show boot menu
Press the F2 key as long as the BIOS prompt appears on the screen.
SIMATIC Panel PC 877
Operating instructions, Release 07/2006, A5E00877780-01
Detailed descriptions
17.6 BIOS setup
17-37
Advertisement
Table of Contents
