Table of Contents
Advertisement
17.2.2
Starting BIOS Setup
Starting BIOS Setup
Start the setup program as follows:
1. Reset the device (warm or cold restart).
2. Press F2 key as long as BIOS prompt appears on screen.
SIMATIC HMI IPC577C
Operating Instructions, 10/2010, A5E02368074-02
In the figures shown, the default settings differ based on the device versions. With the
default setting of your device, the display shown below appears following power-on, for
example:
Figure 17-2
Diagnostics screen of the IPC577C
On completion of the POST, the BIOS gives you the opportunity of starting the SETUP
program. The following message appears on the screen:
PRESS F2 go to Setup Utility
Press ESC go to Boot Manager
or
Detailed descriptions
17.2 BIOS Setup
151
Advertisement
Table of Contents
