Safety - GE Druck DPI 620-IS User Manual

Safety

General warnings
Electrical warnings
Pressure warnings
[EN] English - K0460
Before using the instrument, read and understand all the
related data. This includes: the applicable local safety
procedures, this publication, and the instructions for any
accessories/options/equipment.
•
It is dangerous to ignore the specified limits for the
instrument or its related accessories. Do not use the
instrument or accessory if it is not in its normal
condition. Use the applicable protection and obey all
safety precautions.
•
To prevent electrical shocks or damage to the
instrument, do not connect more than 30V between the
terminals, or between the terminals and the ground
(earth).
•
This instrument uses a Ni-MH battery pack. To prevent
an explosion or fire, do not short circuit, do not
disassemble, keep it safe from damage. For operating
conditions, see Table
•
To prevent battery leakage or heat generation, only use
the battery charger and power supply in the
temperature range 0 to 40°C (32 to 104°F). For
operating conditions, see
•
To make sure the display shows the correct data,
disconnect the test leads before setting the power to on
or change to another measure or source function.
When using a pressure option with the DPI 620-IS calibrator,
these warnings are also applicable:
•
Some liquid and gas mixtures are dangerous. This
includes mixtures that occur because of contamination.
Make sure that the equipment is safe to use with the
necessary media.
•
Pressurized gases and fluids are dangerous. Before
connecting or disconnecting pressure equipment,
safely release all the pressure.
•
To prevent a dangerous release of pressure, make sure
that all the related pipes, hoses and equipment have the
correct pressure rating, are safe to use and are
correctly attached.
WARNING
11-1.
Table 11-1.
Issue 1
Safety iii