Procedure To See The Instrument Status; Procedures To Make Task Selections - GE Druck DPI 620-IS User Manual

2.8.2 Procedure to see the instrument status

Configuration
2
1
TAP

2.8.3 Procedures to make Task selections

CH1: CH2:
source measure
Procedure Overview
2
1
TAP
A
B
C
[EN] English - K0460
Status
3
The amount of memory available (in MB and as a
% of the total on the device): SD Card (internal).
When first using the calibrator, there are default measure
and source functions on the display:
•
CH1 settings: RTD source, RTD type is PT100, scale is °C;
Automation is Nudge; see
•
CH2 settings: Current measure, see
Use the Task menu to complete these procedures:
•
Set the calibrator functions on the display: item
Section 2.8.4.
a. CH1: Channel 1 electrical function: Choose one option:
None
Current
Voltage
Millivolts
TC (°C/°F)
TC (mV)
Frequency
b. CH2: Channel 2 electrical function: Choose one option:
None
Current
Current (24V)
The date of the next calibration.
Charging or battery-powered, and the amount of
charge in 1% increments.
Chapter 3.
Chapter
Resistance
RTD
CJ
Observed*
Voltage
Millivolts
Observed*
Prepare the instrument 2-9
Issue 1
3.
A
; see