Table of Contents
Advertisement
User Manual
1
INTRODUCTION
The Druck DPI612 is a battery-powered instrument for performing
pressure and electrical calibration operations. The Druck DPI612
also supplies the power and user interface functions for all optional
items. The DPI612 uses the PM620 pressure module to allow user
selection of the most suitable pressure range for the task.
1.1
EQUIPMENT IN THE BOX
The following are the common items supplied with the Druck DPI612
•
1/8" NPT & BSP pressure adaptors
•
Set of four test leads
•
Safety and Quick Start Guide
•
Stylus
•
Hand & Shoulder straps
Refer to DPI612 datasheet for full list of accessories supplied with
each DPI612 model.
1.2
OBSERVANCE OF THE USER MANUAL
This manual contains safety and battery installation information for
the Druck DPI612. It is the responsibility of the customer to make
sure that all personnel operating and maintaining the equipment
are correctly trained and qualified. Before using the equipment, read
all sections of this User Manual paying particular attention to all
WARNINGS and CAUTIONS given in the Quick Start Guide.
1.3
GENERAL SAFETY PRECAUTIONS
Read and obey all the operator's local health and safety regulations
and safe working procedures or practices when doing a procedure
or task.
•
Use only the approved tools, consumable materials and spares to
operate and maintain the equipment.
•
Use equipment only for the purpose for which it is provided.
Page 8 of 105
[EN] English – 109M4017 Revision -
Druck DPI612
Advertisement
Table of Contents
