Chapter 4: Pressure Indicator Operation (Mc 620-Is); Introduction; Parts And Assembly - GE Druck DPI 620-IS User Manual

Advanced modular calibrator
Table of Contents

Advertisement

4.1 Introduction

4.2 Parts and
assembly
1
2
3
3
4
a) MC 620-IS
5
[EN] English - K0460
This section gives examples of how to connect and use the
instrument to measure pressure with the module carrier
(MC 620-IS) and the applicable pressure modules (PM 620-IS).
To measure pressure with the IDOS UPM, refer to
To make a fully integrated pressure calibrator instrument with
one of the three pressure stations, refer to the user manual for
the PV 62x-IS series of pressure stations - K0462
Before starting:
Read and understand the
Do not use a damaged instrument.
Note: Use only original parts supplied by the manufacturer.
This figure shows the parts of the module carrier (MC 620-IS)
and pressure module (PM 620-IS).
1
1.
Pressure connection (G1/8 or 1/8NPT) to attach
external pressure equipment.
2.
Pressure and electrical connections for a pressure
2
module (PM 620-IS). These are self-sealing
pressure connections.
3.
Two screws to attach the calibrator (DPI 620-IS).
4.
Electrical connections for the calibrator
(DPI 620-IS).
5.
Pressure module (PM 620-IS) with a pressure
a
connection, reference port (a) and a label. The
label includes:
Pressure range. Example: 20 bar g (g: gauge;
a: absolute); serial number (S/N); manufacturer:
name, address, website.
b)
Caution: To prevent damage to the PM 620-IS, use
within the specified pressure limit on the label.
After attaching these items to the DPI 620-IS calibrator, a fully
integrated pressure indicator is formed that can measure
pneumatic or hydraulic pressure.
Chapter 4: Pressure indicator
operation (MC 620-IS)
"Safety"
Pressure indicator operation (MC 620-IS) 4-1
Chapter
3.
section.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents