Chapter 5: Instrument Communications; Introduction; Connect To A Computer (Usb) - GE Druck DPI 620-IS User Manual

5.1 Introduction

5.2 Connect to a
computer (USB)
1
2
3
4
[EN] English - K0460
This chapter gives a description of these items:
•
the procedures to connect the instrument to a computer with
the optional USB mini Type B cable.
For a full list of optional accessories, refer to
A USB mini Type B connector connected between the
instrument and a computer can be used to download or upload
data to the SD card, see
Note: If the power supply fails, the data will not transmit
correctly.
Step Procedure
1.
Start the computer.
2.
On the right-hand side of the instrument
(Figure
the cover for the connections.
3.
Push the mini Type B end of the USB cable into
the USB socket on the instrument.
4.
Set the instrument power on.
When the connections are complete, files can be moved
between the computer and the DPI 620-IS calibrator using
normal file manager software (for example, Windows Explorer).
Note: The computer can get access to the internal memory of
the DPI 620-IS calibrator by using Active Sync.
Chapter 5: Instrument
communications
Section
Chapter 6 (Datalog operation).
1-3), use the rubber recess to pull down
Instrument communications 5-1
1.4.