Operating In System Menu - Denso BHT-100BW-CE User Manual

2.4.3 Operating in System Menu

On the desktop, double-tap BHTSHELL. System Menu starts up and the following screen appears.
To run the items in System Menu, tap the desired item or press the corresponding numerical key.
To quit System Menu by using the keys, press the BS key while holding down the SF key on the System
Menu screen above.
The keys below are so designed that the function of each key is consistent in every screen.
Numerical keys
ENT key
Tab key (assigned to the
M1 key by default)
C key
* Currently active item. On the screen above, the [1:Execute Program] is focused.
** The C key is inoperative on the following menus in Section 2.4.4, "Detailed Description of the
Functions in System Menu."
- [2.1] Ymodem Menu
- [2.2] ActiveSync (IrDA)
- [2.3] ActiveSync (RF)
- [3.1] Control Panel
- [3.4] RF Menu (Network Interface Control)
- [ 5 ] Explorer
Pressing a numerical key corresponding with a desired menu
number starts the desired item displayed on the screen.
Pressing this key executes the focused* item.
Pressing this key moves the focus.
Pressing this key returns to the immediately preceding screen. **
41
Chapter 2 Getting Started the BHT and System Menu