Adjusting the LCD contrast
Calibrating the touch screen
Displaying/hiding the status indicators
Choosing "2:LCD Contrast" on the Display setup menu calls up the
screen shown at left.
You can adjust the LCD contrast to eight levels--0 to 7, by moving the
horizontal scroll bar.
The default is 3.
Choosing "3:Calibration" on the Display setup menu calls up the
screen shown at left.
Touch the center of the "+" sign with the stylus according to the
instructions shown on the screen.
Choosing "4:Status Display" on the Display setup menu calls up
the screen shown at left.
You can display or hide the following status indicators on the taskbar:
BATTERY:
RF
SIP:
SHIFT:
CPU STANDBY
The defaults of the items above except the CPU STANDBY are
"Display."
For details, refer to Section 2.2.2, "Status Indicators on the LCD."
65
Chapter 2 Getting Started the BHT and System Menu
Battery voltage level
Synchronization state
Software input panel (Software keyboard)
Keypad shift state
Standby state of the CPU