Denso BHT-100BW-CE User Manual page 7

Handling the battery cartridge
• Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could
cause battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury.
• Do not carry or store the battery cartridge together with metallic ball-point pens, necklaces,
coins, hairpins, etc.
Doing so could short-circuit the terminal pins, causing the batteries to rupture or the battery
fluid to leak, resulting in a fire or bodily injury.
• Avoid dropping the battery cartridge or letting it undergo any shock or impact.
Doing so could cause the batteries to break, generate heat, rupture or burn.
• Only use the dedicated charger (CU-7001, C-700 or C-750) for charging the rechargeable
battery cartridge.
Using a different type of charger could cause battery-rupture or leakage of battery fluid and
result in a fire, bodily injury, or serious damage to property.
• Never charge the rechargeable battery cartridge where any inflammable gases may be
emitted; doing so could cause fire.
Handling the BHT
• The BHT uses a laser light for indicating the scanning range. The intensity of the laser light
might be too low to inflict bodily injury. However, do not look into the laser beam.
The BHT complies with Laser Safety Standard, Class II of 21 CFR Chapter 1, Subchapter J.
The BHT does not mount beam attenuator and laser radiation emission indicator required by
this standard. Instead, the software-controlled Magic keys (see Section 2.2 "Components")
function as them because the laser light is not enabled without the Magic keys pressed.
• Do not look into the light source through the reading window or point the light source towards
the eyes.
The light emitted through the reading window is harmful to the eyes.
• Do not poke at the eyes with the stylus that comes with the BHT.
v