Denso BHT-100BW-CE User Manual page 82

[3.4] RF Menu (Network Interface Control)
Displaying the wireless module version and opening/closing the RF device
Choosing "4:Radio Frequency" in the System Properties menu
calls up the screen shown at left.
Displaying the wireless module version and opening/closing the RF
device
Displaying the IP address and MAC address
Setting the ESSID
Setting the RF options
Setting the WEP keys
Displaying the current communications link status
Testing with PING
Tapping the Info tab on the NIC (Network Interface Control) Control
menu displays the screen shown at left.
This menu displays the following:
Driver Version:
Firmware Version:
Hardware Version:
You can also open or close the wireless module by tapping the RF
Open or RF Close button, respectively
Closing the NIC Control menu automatically closes the RF device
even if being opened. If you need to display any other window
while keeping the RF device open, use the Minimize button to
minimize the NIC Control menu window.
69
Chapter 2 Getting Started the BHT and System Menu
Version of the RF driver
Firmware version of the wireless module
Hardware version of the wireless module